Delaware Well Data › Kent County › Smyrna (19977)
Smyrna, DE (19977): well depth, water level & drilling cost
✓ 1,823 Delaware DNREC records · Kent County
Pull every recorded well near a Smyrna (19977) address — $49
How deep are wells in and around Smyrna (19977), Delaware?
The median drilled well depth in and around Smyrna (19977) is 70 ft, based on 1,813 wells with recorded depths in the state Delaware DNREC database. Half fall between 36 ft and 165 ft; 90% are shallower than 213 ft.
How much does it cost to drill a well in and around Smyrna (19977)?
Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Smyrna (19977)?
The median static water level is 15 ft below ground surface (middle half of wells: 10 ft–39 ft), from 802 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kent County.
Part of Kent County well records.
Method: medians computed from Delaware DNREC records (Delaware DNREC non-public well permits, water-supply wells only (monitoring, observation, soil borings, dewatering and remediation wells and un-drilled permits excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.